What is WS2811?
ws2811 is an rgb led light control chip that can convert data into control signals through io signals to achieve various color settings
ws2811 is a three-channel LED drive control dedicated circuit. The chip contains an intelligent digital interface data latch signal shaping amplification drive circuit, a high-precision internal oscillator and a 12V programmable stable current output driver. The three channels have a certain delay turn-on function, which can reduce circuit ripple.
The chip uses a single-wire return-to-zero code communication method. After the chip is reset online, the DIN terminal receives the data from the controller. The first 24-bit data sent is extracted by the chip and then sent to the data latch inside the chip. The remaining After the data is amplified by internal shaping processing, it is forwarded and output to the next-level chip through the DO port, so that high-speed data transmission can be achieved.
The data latch inside the chip generates different duty cycle control signals at the OUTR, OUTG, and OUTB control terminals based on the received 24-bit data. When waiting for the RESET signal to be input at the DIN terminal, all chips synchronously send the received data to each segment, the chip will re-receive the data after the signal ends. After receiving the first 24-bit data, it forwards the data port through the DO port. Before the chip receives the RESET code, the original output of the OUTR, OUTG, and OUTB pins remains unchanged. After receiving the low-level RESET code of more than 280μs, the chip will output the 24bit PWM data pulse width just received to the OUTR, OUTG, and OUTB pins.
ws2811 parameters:
Brand: full color light strip
Lamp bead model: 5050RGB
Voltage: 12V
Power: 10W/M
Number of lights: 30 lights/M
Pixels: 10PIX
Board width: 10MM
IC model: WS2811
Lifespan: 30Kh
Board background color: white board/blackboard
Data transmission: 800K/S
Waterproof level: bare board - not waterproof, glue dripping and waterproof - IP65, casing waterproof - IP66, glue filling and waterproof - IP68
Packing: 5 meters/tray in anti-static bag
Notes on ws2811:
The brightness requirements for LEDs vary depending on different occasions and products. For example, if LED jewelry counter lights are placed in some large shopping malls, we need to have higher brightness to be attractive. For the same decorative function, there are different products such as LED spotlights and LED colorful light strips.
Antistatic ability: Antistatic ability LEDs with strong antistatic ability have a long life, but the price will be higher. Usually antistatic is best above 700V.
ws2811 product features:
1.It adopts low-voltage DC12V power supply to drive and power supply, making it safer for users to use.
2.Use flexible FPC as the base material of the light strip, which has the characteristics of good electrical conductivity, fast heat dissipation, and resistance to bending. It can be bent into various shapes at will.
3.It uses SMD?020RGB lamp beads and an external WS2811 IC chip, making it a programmable light strip.
4.It can be made into various waterproof effects such as glue dripping waterproofing, casing waterproofing, glue injection waterproofing in the casing, etc. making it usable in most places.
5.A variety of lighting effects can be achieved through controller programming and can be applied to different scenes.
6.ws2811 is a single-point single-control light strip with highly consistent light color. It is a very cost-effective light strip.
ws2811 application areas:
1.LED full-color luminous character light strings, LED full-color modules, LED full-color soft light strips and hard light strips, and LED guardrail tubes.
2.LED point light sources, LED pixel screens, LED special-shaped screens, various electronic products, and electrical equipment marquees.